6 Steps involved in Pressure Washing Service For The Roof

Pressure washing is all about using the power of water to take off stubborn grime and dirt from the surfaces such as roofs, walkways, driveways, patios, and backyards. The basic reason for using this technique is to deal with stains that won’t go away with any other washing methods. There is a visible change in the color and texture of a surface when it is exposed to such an intense jet of water. That actually does not change that is the returning back to its original state. You may not be skilled enough to perform the process and need trained professionals for the job. Still, a person who wants to acquire pressure washing service in Aventura FL needs to understand the essential steps discussed here:

 The appropriate size and power of the machine

 Every type of surface needs a specific amount of pressure from the water to deal with stains and if you do not know the exact numbers then things can turn out to be a problem. The hard surfaces such as concrete tiles need the pressure of more than 2500 psi and in case of softer materials such as wood, the required pressure will be around 1500 psi.  

The best nozzle for the job 

The size of the nozzle also determines the amount of pressure required for a specific area of the house. A zero-sized nozzle can exert the maximum pressure and the strongest jet of water.

Add protection for the non-targeted surfaces

 Use proper covering for the other adjacent surfaces so that in the process of cleaning you do not end up damaging the surroundings. A plastic sheet or tape can be easy to work with when going to conduct a pressure wash. Some of the things we ignore are the metallic surfaces and to your surprise metal may be a soft target for that powerful jet of water.

Apply the pressure on an inch first 

Use the pressured washing techniques on a smaller patch before you start working on the whole area because it may be damaging for that kind of surface. In some cases, the pressure may become dangerously high to destroy the floor. Gradually increase the pressure for making it effective for the intended surface and reduce chances of damage.

Follow the top to down sequence

Start using the pressure in a sequence that is usually downwards so that the debris keeps flowing downwards. Also, make sure that you are selecting the most appropriate direction for best results.

Use soft wash to rinse

A regular jet of water is needed for rinsing off the dirt and reveal the shiny good as new surface. After the clean and shiny surface is revealed, you will be surprised to see that it has been there the whole time and you forgot how it actually looked when installed in the beginning. These service providers are skilled and have spent many years working hard on cleaning difficult filth on surfaces in houses and exterior office buildings.